Siemens M75 - user opinions and reviews

Siemens

Voting results

Design
7.9
Features
8.2
Performance
8.2
Votes:
1962
 Hits:
229216

Pages: 12 3 45…1718

m75 better to 3g mobile phone

  • Reply
  • 2006-06-05 17:34
  • SeEL
  • U

I have been having this phone for about 6 month and I had no problem others mentioned
no rubber or cover problem
just 4-5 times turned off and that's ok
nothing else and I like this phone

  • Reply
  • 2006-05-27 09:09
  • nTJS
  • U

i've got the siemens m75 there is 2 bad 1.batterry is to short life and live. 2. bluetooth is to slow if you want to conected with nokia mobie phones ....

  • Reply
  • 2006-05-05 18:26
  • nx7H
  • U

Hi all, i just want to ask.... I have been dreaming of having outdoor phone such as M75, but i read that many of you have complained about the rubber of M75 which is peeling so soon. Is it the rubber on the side of phone? or the one inside the back cover?
Thanks...

  • Reply
  • 2006-05-03 13:24
  • PA@7
  • U

Hey. I wanna know what happened with my M75's MMC. I just can't read it!!! I bought it 3 months ago and no way of reading it. can't put any music in it. nevertheless I think I'm lucky so far for my phone is kkepeing well and in good phisical conditions. the ringtones... Just Cool!!! i put some of my own... cool. BUT THE MMC??? WTF happened!!! I wonder if anyone can give me a piece of advice... :-) Thanx.

Zeeya!

  • Reply
  • 2006-05-01 13:25
  • MuAL
  • U

Hey I wanna buy this phone.Can any1 help me by saying dat thus this phone supports mp4 or avi.Plz help me I am really interested in this phone although I know that this phone has some damn disadvantages.
***BY ARAF****

  • Reply
  • 2006-05-01 08:00
  • PEm2
  • U

To ide4...

Thanks...
in that case, I'll still stick to my one year faithful M65 for the moment (though it couldn't play mp3 ringtone)... The rubber on my M65 still intact and well...
Sigh... If the rubber in M75 is peeling, its' really a shame. Oversight from Siemens. How could they make new phone worst than phone before?

  • Reply
  • 2006-04-25 17:20
  • PFM9
  • U

TO : casio

I'm from Indonesia, I think phones from both countries came from same factory. It says "Made in Germany" on the box's IMEI sticker. And I trust it coz I bought it at Siemens distributor at Indonesia, not from black market. Don't know if the phone already made by Ben-Q in Taiwan...

Just check everything before you buy it. Don't get same problem like me in my last post. Especially the rubber thing, coz I'm trying keep it stick with the phone body using glue at the moment.

Goodluck :)

  • Reply
  • 2006-04-25 09:56
  • PFy5
  • U

Hi... Could anyone from singapore let me knows if the rubber peeling, battery drain fast and frequent reset etc also happen to the btach of M75 phones in Singapore??? I am thinking of upgrading from my M65 to M75 (2nd hand). Thanks. My M65 still serves me fine... Just thinking of playing mp3 ringtone by M75, that's all...

  • Reply
  • 2006-04-24 19:02
  • PFM9
  • U

from what I heard, m75 does not support chinese.
but someone have reported flashing a chinese firmware of CX75 into M75 and it works.
anyone try it before?

  • Reply
  • 2006-04-24 08:02
  • F4pr
  • U

I have the phone for about 6 months. I also have same problem here, rubber beginning to melt and also loose the joystick cap.
I brought my phone to Siemens, they said that I have to change the whole body/case. When I asked the price.. total about half of the phone price, Wow.. So if you bought this phone, (not count on the body/case price, only the phone function) actualy it's cheap, only half price. Considering what they sell here is the tough body/case of the phone.

I also have problem with the RS-MMC. I put 512Mb RS-MMC, first it was working fine. I think this phone could perform hot swap function (you can eject the MMC without turn off the phone, there is an "Eject card" menu at the option menu, I often use it to transfer MP3 using card reader, more faster than infrared or bluetooth), but after some times I did the hot swap function, suddenly it won't read my MMC. I tried to read my MMC at my card reader, it was fine. I also tried to read it using NOK** phones, worked fine. I've to sell my MMC to NOK** user. But I never giveup. I bought more expensive MMC (Kingstone), worked fine, never use the hot swap function, I turn off the phone to eject the card.

But another problem came. When I played an MP3 file, suddenly it shuted off. I turned back on the phone, tried to play same file worked fine. Other day, when I played another MP3 file, it shutted of again, turn ed back on, played the same file worked fine ??

TO badamadafaka :
Using standard Music player, you cannot access another menu while playing MP3. When you play MP3, then a call came in, after you answer or reject it, the MP3 is not paused, but stopped. If you played a play list, and that thing happen, then you have to begin from the beginning of the play list, and accessed next song with your joystick until last song you heard, and start from the beginning of the song.

The Video is OK, only you have to save it to phone's memory first then move to MMC, maybe the MMC access speed not enough for video recording. So the legth of recording depends on the available phone memory.
The camera OK, you have to use a flash if you want to capture in low light condition(that's OK, want a perfect one? got get a digital camera..).
MP3 OK, good sound, using handsfree and standard player software, but remember, no equaliser (want a perfect one? get the SON*ER*****N WALK*** edition, good one..).

Software?? You know.. like everyone said, maybe better after you upgrade the firware (I haven't), and not to put much file in 14Mb phone's memory, and it deppends on your patience :)

Battery ?? In my usage, I have to charge it every morning, but it quite fast. I always charge it when I take a bath.

Style ?? I don't care...
Radio?? I listen radio in my car, and my HI-FI in my home and office, If there was no radio, I listen to MP3 (that's why I use 512Mb MMC).

Sorry for my bad english granmar..

  • Reply
  • 2006-04-22 14:24
  • PFy5
  • U

iam really disapointed with this mobile phone!the ruber melt..and now its bare!the black button from the joystick is gone!and i have this mobile phone 1month..im really disapointed and siemens says that i did all that things on the phone and that this damage is not in waranty..really disapointed!

  • Reply
  • 2006-04-18 08:55
  • SYJw
  • U

I want to buy it but i dont know exactly it is good or no?
be cause i think teh pixsels for LCD is not to much
and i have heard that the rubber goes very fast can u tell me is it right?

  • Reply
  • 2006-04-02 19:09
  • mie6
  • U

The internal speakers are lame as well.
The sound is muffled. so the MP3 ring tones are not that great for it..

  • Reply
  • 2006-03-28 09:58
  • F4pr
  • U

I was excited when I got the phone..It looks really cool..
Now however I am frustrated with what a lousy product it is.
1) The Rubber is wearing away very quickly, and I only ever put it in the casing on my belt!!
2) The MP3 playing rubbish. It is a 50/50 chance that it will play the songs on the RS-MMC.
3) After setting the ring tones on either the RS-MMC or on board the phone, it still reverts to the original ringtone!!!Ahhhh!!!
4)It keeps Not reading any RS-MMC!! I sent it for repair and still!! ahahh it is driving me nuts!
5) The battery life is horrible.. with normal usage, it lasts me 2 days max..

  • Reply
  • 2006-03-28 09:54
  • F4pr
  • U

Had this phone for almost a year I`m satisfied with it`s feature and reliability in the first month but in the last 3 month the screen is darker than before the rubber are peeling camera become disabled and now the joystik and the keypad begin to crumble
this is a nice feature phone but with less quality

  • Reply
  • 2006-03-27 06:05
  • PABZ
  • U

I have the phone from about 6 months and mine also started to fall apart, mine rubber and joystick cap had fallen out, mine battery is draining way too quickly and the software is pretty unstable but it also has a very beautiful design, a good camera and an extremely powerful speaker so I am partially satisfied with it.

  • Reply
  • 2006-03-26 00:28
  • MFrR
  • U

Just bought this phone. Almost lost the nipple/connector cover. I was wondering, if without the connecter cover, is it still water/dust resistant with the MMC slot and connectors exposed??? The old Nokia 6250, even though came without any form of connector covers works fine.

  • Reply
  • 2006-03-25 00:15
  • mx7x
  • U

D..n M75 i have mine from 9m. and it's already falling a parts. First i'v lost nipple on the joystick,second rubber start falling off from battery cover and not to mention sw stability.Today battery starts to playing in socket...Yes, it's realy resistent to dust and water but not to my pocket at all /no dust over display like M65 :)/.I would not recommend this phone to anyone.
sorry for the "english" of mine :)

  • Reply
  • 2006-03-23 14:46
  • m{jD
  • U

anyone who knows how to make the M75 play mp3 while i'm writing a msg or just browsing the menu, pls drop me an email! i was looking for some solutions, but without success. anyhow. a nice phone, but the software is real crap. it is freezing all the time and turns off without any reason. just like every other siemens. :D

  • Reply
  • 2006-03-21 16:58
  • MQ5e
  • U
Pages: 12 3 45…1718

Note: Sponsored advertising links are in green.