AnonD-525648, 13 Apr 2016Actually u have to install all the update.... I nearly installed 3 updates after installation ... moreThe initial installation will begin with 10.10.10586.107. This build has lot of bugs. Immidiately download .164 and finally yesterday released .218. Then Perform Hard Reset.This will solve your problem.
AnonD-525671, 13 Apr 2016after Win 10 upgrade, touch has become rather sketchy. any fixes for that?Try a soft reset by pressing and holding reset button above power button and start the mobile again .... if still problem persists try to do hard reset ....
AnonD-525648, 13 Apr 2016Actually u have to install all the update.... I nearly installed 3 updates after installation ... moreSystem states that it is upto date and no more upgrades are pending....Battery saver is acting funny. It is not coming up even when battery percentage is falling below the specified percentage.....what else can be done?
after Win 10 upgrade, touch has become rather sketchy. any fixes for that?
AnonD-525671, 13 Apr 2016After Windows 10 upgrade, battery is getting drained very fast. Any suggestions??Actually u have to install all the update.... I nearly installed 3 updates after installation of windows 10 ... Then only battery problem will be solved .... And try to keep battery savor on always ....
After Windows 10 upgrade, battery is getting drained very fast. Any suggestions??
Guys today morning I got 200mb update of windows 10 .... This is the third one after I got windows 10 ..... Really great without a single error....
Guys .... Here r the particular things before flashing ....
Windows 7 or newer operating system with driver support
Your phone should have minimum of 25% battery
Surely you should have unlimited data that to with WiFi connectivity
Your system or laptop hard disk should have minimum 5gb free space that to on c:
Your system or laptop shouldn't have any operating system errors....
My best advice better u should try the flashing windows 10 desktop or laptop because it already have all supportive files .....
The windows device flashing tool will use minimum 500mb internet usage ....
The windows 8.1 latest update download should use hardly 2gb internet usage ....
The windows 10 mobile update should use 1gb internet usage on first update .... After updating first time check again for updates .... And another second update should come and it's use minimum 500mb internet usage ....
Better have a unlimited high speed plan with WiFi connectivity..... It took 3hours to complete the entire process for me with 9mbps connection speed ...
After u download the windows 8.1 update u should click next then battery icon appears then next it shows how to get flash mode in mobile ....
Now switch off your mobile and switch on by pressing power key and after vibration cluck and hold volume up .... After u got flash screen release the key and connect the mobile to ur pc or laptop ....
Now u don't have to click anything .... The windows device flash tool should start flashing your mobile automatically....
If check for connectivity .... Either cable, usb ports .... If still having problem send me a email to .... Karpri87@gmail.com ... By stating the error had ....
sleepydinosaur, 11 Apr 2016Oddly, it doesn't seem to work for me. It will not start flashing after I started the flashing... moreFirst bring the phone into flashing mode.Then connect the phone via usb cable to the pc in flashing mode and repeat the process again.
Maximus !, 12 Apr 2016Hi, Is there a possible way to track the progress of the Firmware being flashed ?. After the ... moreWait for the WDRT to complete the flashing process. You will see the progress bar there.Once the flashing is done the phone will automatically restart and you will see the laungage and welcome screen. After completing the process when start screen appears go to the settings. This newly modified image will be updated to windows 8.1 update 2. go the system- about phone-more info.The last five digits are the firmware no changed from 15009 to 15013.
Abhipore, 09 Apr 2016This is to inform all of you on this post that finally Windows 10 mobile upgrade is available ... moreIs there any screen shots which you have provided..
sleepydinosaur, 11 Apr 2016Oddly, it doesn't seem to work for me. It will not start flashing after I started the flashing... morenvm, works now
had to plug in the usb cable on the battery screen before clicking continue instead afterwards. Maybe the upgrade to Windows 10 is the reason that it works now, too. Dunno. Nevertheless, ty @Abhipore
Anonymous, 09 Apr 2016thank you v much Hi,
Is there a possible way to track the progress of the Firmware being flashed ?. After the final stage, the Microsoft Recovery tool stays at "Device Restart" & there is a still image of a "Flash & a Static Gear". I'm not sure if this is progressing since I've done this same step many times without any results.
Please help to provide some directions !.
Thanks !
Abhipore, 09 Apr 2016This is to inform all of you on this post that finally Windows 10 mobile upgrade is available ... moreOddly, it doesn't seem to work for me. It will not start flashing after I started the flashing mode and clicked install software. After the battery screen only the screen with the instructions how to set the phone into flashing mode will appear again. I have a Blu win HD LTE x150.
Abhipore, 09 Apr 2016This is to inform all of you on this post that finally Windows 10 mobile upgrade is available ... moreThank you very much and I tried it i love my phone 📱 very much now
Abhipore, 09 Apr 2016This is to inform all of you on this post that finally Windows 10 mobile upgrade is available ... morehi,
thanks
Abhipore, 09 Apr 2016This is to inform all of you on this post that finally Windows 10 mobile upgrade is available ... morethank you v much
This is to inform all of you on this post that finally Windows 10 mobile upgrade is available to Blu win HD LTE x150e. Here are the steps:
1) Install WIndows Device Recovery Tool onto your pc or laptop.
2) After Launching the tool select My device Was not detected.
3) Then select the manufacturer BLU. Select the Model BLU WIN HD LTE.
4)Click on Install Software where it wil ask to download latest win 8.1 recovery image which contains new firmware.Download complete BLU_WIN_HD_LTE_00150.04717.20001.15013_RETAIL_FLASH_20160226_00150.04717.20001.15013.FFU file.The path for the download is C:\ProgramData\BLU\Packages\Products\Win HD LTE.
5)Now turn off the phone. Press the power button and immediately after vibrating press and hold volume up button till you will see flashing icon and spinning wheel. This will be flashing mode.
6)Now connect your phone to the pc via usb cable in the flashing mode.
7)Again Launch the app. Select Manufacturer BLU-Model-Blu win HD LTE.Click on Install software. This time you will see the battery icon.Make sure that battery is almost 25% charged and follow the onscreen instructions. Now flashing will begin and once completed the language screen will appear. When the start screen comes go to the settings and go to about phone.click on More information.See That the firmware has been changed from 15009 to 15013.
8)Now go the windows store and download Upgrade Advisor app and run. IT will check for the upgrade and finally says the upgrade is available. Tick on Enable Windows 10 Upgrade. Now the app will be checking for the updates.
9)Finally go the settings and check for the updates.The update will be available.
rijax, 06 Apr 2016actually i register my outlook id for developer account at free of cost .... so better search ... moreHi Rijax. I think the small update you are talking after installing PFD is probably Developer Preview configuration Update. I bought this phone in January. First it was updated to Win 8.1 GDR2 update.Then I remember when i have downloaded PFD app and tried to install this update but it was getting error that "Update Downloaded couldn't be opened". But this time i unlocked my phone through Windows Developer Registration tool which is a part of Visual studio 2013 or higher version (But you can download win phone 8.1 or Win 10 SDK lite or full version without having Visual Studio in your pc for that search google how to download standalone SDK )then downloaded PFD from the store and this time the same update successfully installed. But as you said I followed the steps but no update was available. Anyway I will try one more time.
Patrik, 06 Apr 2016Hello! I do not have access to a credit card, only debit card. So I guess this will not work?actually i register my outlook id for developer account at free of cost .... so better search it on google or xda developer website ....
Tip us
1.9m 150k
RSS
EV
Merch
Log in I forgot my password Sign up