Nokia 5233 - user opinions and reviews
- AnonD-335
- utk
AnonD-542, 07 Apr 2011Can you teach me how to use this dark rain effect. Is it buggy or Ram hungry? Cause i just fla... moreJust copy the effects folder to resources, same procedure nothing different(BTW the old c2z patch didn't work for me, phone restarted every time I applied it. I had to make a new one).
The problem is that, every time you enter a menu or HS the screen goes blank and you have to change the orientation of your phone to make it visible again. Perhaps porting it into the FW may overcome this glitch.
- AnonD-542
- fCM
AnonD-335, 07 Apr 2011The gallery seem super fast with the images loading almost instantaneously like in C6(I have t... moreCan you teach me how to use this dark rain effect. Is it buggy or Ram hungry? Cause i just flashed with Blaze. But i am knda pissed cause Ttpod4 isn't working. It never did in any original firmware. In only c6 and n97 it did.
- AnonD-542
- fCM
novice, 07 Apr 2011thanks sb i will definately try blaze but at the end as what i have came to know that its base... moreActually you can use every cfw with v40 even though they were made for v21 or less. Cause me and side have used katalyst^2 on v40. But i won't recommend you to do the same with c6 based cfws cause the core is different in those.
- AnonD-335
- utk
novice, 07 Apr 2011thanks sb i will definately try blaze but at the end as what i have came to know that its base... moreDejavu does work in Blaze, But the problem is that the menu is so fast that by the time the particle effect loads up you are already at the next screen and the effect gets cut in it's track. BTW effects are not applied to the highlight bar(not sure whether dejavu originally has it or not but it's not working for weed, smoke or the like)
- AnonD-335
- utk
AnonD-542, 06 Apr 2011I haven't tried blaze yet. Can you give a few differientiation between it and katalyst^2. For ... moreThe gallery seem super fast with the images loading almost instantaneously like in C6(I have thousands of images and hundreds of videos including full length movies). Scrolling through menu is much faster and smoother than before.
I experimented a bit with theme effects, a lot of effects hat didn't work previously works now but still it's not at the level of C6. 'Discord' still doesn't work properly but, I was surprised to see animated rain and thunder on my homescreen when I applied 'Dark rain'(never tried in Katalyst, so don't know whether it's an improvement or not), too bad that effects pack is too buggy to use.
Improvement in RAM is definitely THE major + point of Blaze, touch to unlock is a welcome and cool addition.
- AnonD-335
- utk
bipul, 07 Apr 2011Pls tell me anyone how can i install Document viewer software in nokia5233, for free?Download Picsel Smart Office from mobile9.
- AnonD-3601
- vwm
for using c6 CFW on nokia 5233 go here
http://forum.mobilegearz.com/index.php?board=7.0
- sk
- utK
wenever i try to install a theme it says certificate error, wat shall i do nw.. please sm1 suggest smthng
... thanx in advance
- bipul
- PEq
Pls tell me anyone how can i install Document viewer software in nokia5233, for free?
- utk
- uvu
AnonD-122, 06 Apr 2011Hi novice mate.. I'd recommend you flash with Blaze as it is much better than Katalyst^2. In a... moreSounds interesting, what is this Binh24 core btw? Is it based on C6 or 5233 or the combo like you mentioned?
- novice
- KIg
thanks sb i will definately try blaze but at the end as what i have came to know that its based on v40. if i upgrade my21.0.004 to 40 then i wont be able to downgrade it . am i right? and wont be able to use katalyst and arun or vic mode. i like those djvu effects. however my last choice would be blaze as i am a heavy user. thanks again
- novice
- KIg
AnonD-122, 06 Apr 2011Hi novice mate.. I'd recommend you flash with Blaze as it is much better than Katalyst^2. In a... morethanks side. i will definately try blaze soon. but i wana try katalyst and arun-or-vic mode. it had those djvu effects i like them. if i use blaze i wont be able to use them coz blaze is probably based on v40. i wont be able to downgrade to check katalyst /arun-or-vic modes then. of course my final destination is blaze as m a really heavy user.thanks again for your reply.
- AnonD-542
- fCQ
AnonD-295, 06 Apr 2011I said many times to you to hard reset. But you never did. I said you to delete those folders ... moreOkay dude, you kinda feel upset with me. I will try again following each and every step you mentioned. But this time i will simply keep a backup of the system files of C and E drive, in case i mess up things.
Btw, heard that Envy^5 based on this n97 port will be released today. Any idea if its true or not?
Oh and as for my being scared and givin up thing, its not true. Cause i still got warranty and hence i will be pleased even if i happen to blow my set (will get a replacement, he he). But it was kinda creepy when my imei got erased all of a sudden. My bad i didn't hard reset.
- AnonD-122
- PB7
novice, 06 Apr 2011hi sb.i hv 21.0.004 firmware on 5233 can i flash it with blaze?katalyst^2? in daily forums its... moreHi novice mate.. I'd recommend you flash with Blaze as it is much better than Katalyst^2. In addition Blaze is based on the latest V40 fw. And Blaze is something completely different from the original firmware. They have actually used the C6 Rofs2 file and replaced it with the original files of 5233. So if you are planning on flashing your phone with Blaze, you should download the core files by Binh24 separately for Blaze and should not use the original v40 5233 firmware files. It should be noted that the core files for blaze does not contain the Rofs3 file. Instead everything is packed into the Rofs2 file itself to obtain more space for adding mods and apps. replace the Rofs of core with the modded file and replace the ud file with the one that is supplied with blaze.
The rest is done as ususal. Follow the same procedures for flashing. Also note that after flashing, do not hard reset the phone.
- AnonD-122
- PB7
AnonD-542, 06 Apr 2011I haven't tried blaze yet. Can you give a few differientiation between it and katalyst^2. For ... moreNot much of a difference. The phone is a bit more snapy and the amount of free RAm is a bit more than in Katalyst. There are however quite a few mods unique to Blaze like the 'tap to unlock' screen seen in S^3 and recent S^1 devices like C5-03. I'm not sure which mod they have used for kinetic scrolling but it is super smooth and feels more natural to the touch. The browser seems stable as well. Haven't come across any flash player related issues. There's a bubch of useful apps that come preloaded as well like auto installer and Memory check. The most welcome feature for me is the availability of more free RAM which now lets me run the latest version of SPB shell more smoothly. The battery life also need a bit of mentioning as well. I thing battery life has improved a lot. I get 2 days of moderate usage easily even with the shell running on top of it. I also like the breathing lights for the charger as well. However some of the patches like 'disable profile switch note' doesn't seem to work. I enabled the bass effects patch to get the best audio quality and it does work well. Tomorrow gonna get myself a WH-205 for rough use and for music on the go. My she9800 is showing signs of wear and tear so gotta give it a bit of rest. Don't have enough money to buy a new pair so gotta make due with the WH-205 for now. My bought one from Nokia Priority for 349/-.
- novice
- t@G
hi sb.i hv 21.0.004 firmware on 5233 can i flash it with blaze?katalyst^2? in daily forums its mentioned that blaze is for rm625 as well. so need little help. so should i replace the uda.rofs2 files with 21,0,004 .thanks
- novice
- t@G
hi sb.i hv 21.0.004 firmware on 5233 can i flash it with blaze?katalyst^2? in daily forums its mentioned that blaze is for rm625 as well. so need little help. so should i replace the uda.rofs2 files with 21,0,004 .thanks
- AnonD-295
- Hkv
AnonD-542, 06 Apr 2011Oh well. H.264 didn't work at all. Not nHD nor anything above qvga. I returned back to my prev... moreI said many times to you to hard reset. But you never did. I said you to delete those folders from the card. But you flashed with your own methods. Obviously you got it's results , got scared and gave it up.
Mate, n97 flashing is a totally different thing.
Even without any modes i feel it way better than useless C6 port.
Most of the guys got only two bugs ,call and camera bugs. Call bug can be fixed right from the phone. Camera bug can be fixed with NFE.(bug is only with image mode )
Apart from these, it will beat useless C6in every department. Ram value is awesome. Ngage and AVC videos worked like a charm. I can show screenshots from my mobile.
I salute the guys of daily mobile for their hard work .They and beta testers like me are not earning a single penny for this.
C6 is now a history for me at least.
Thanks
- AnonD-542
- fCM
AnonD-122, 06 Apr 2011Let's just keep our fingers crossed in the meantime. Well I'm currently using Blaze final rele... moreI haven't tried blaze yet. Can you give a few differientiation between it and katalyst^2. For eg, speed, effects, mods, flexibility etc.
- AnonD-542
- fCM
Oh well. H.264 didn't work at all. Not nHD nor anything above qvga. I returned back to my previous firmware as it didn't have any mods and hence i wasn't feeling good with the way the phone handled. Although i have to say that its kinda fast. Waithing for the final version or better still a cfw based on it.
So guys, its better to stay away from it for a while unless you want to contribute to its development being a beta tester.
Oh btw, Vx is our old friend Venugopal and he can help a lot with firmware related stuffs as he has learnt a lot from dailymobile recently.
Tip us
881k
145k 87k
558k
RSS
Log in I forgot my password Sign up