hey guys the wavedroid project needs some developers to port the android to wave so plz visit http://tiny.cc/lmbtb and send a pm as soon as possible
i m voting "1" in each dept of wave daily 5 times...dats y its rating has come down to 8.8.. i want my N8 to surpass wave..do wht evr u can..but i ll win
hi guys need ur help , i recently purchased 8 gb mem card for my wave , i was able to trasnsfer all data except the games from application store like kroll etc so kindly help me to get those games back on this mem card , thanks in advance .............. cheers
Rajesh, 30 Oct 2010when bada 1.2 available???? In the end of november, but you can put manually with multiloader.
bada 1.2 will be able to improve the wave camera???? after that can it look better in pc???
Anonymous, 30 Oct 2010i'm so disapointed ...how to improve camera???or not look good in pc....my old n73 is 3.2 mp c... moreI think that pictures with wave can be extremely great (outdoors) but also extremely bad (mainly indoors). It is important to keep the phone very still and keep pressing the button until the picture appears on the screen. I heard that the new firmware next month with bada 1.2 will greatly improve the camera quality and flash management.
Radius, 30 Oct 2010Hallo everyone. Here goes a short manual how to use Service Mode for changing some volume conf... moreGood post Radius.
Have been using this hidden menu with my samsung phones since i had my Pixon(with different codes)to makes calls and ringtones louder.
What is good is when you upgrade the firmware with Kies, the changes are still here, no need to make it again.
Whatever you do, always write down the original value. Careful because a hard reset will not reset the changes.
i'm so disapointed ...how to improve camera???or not look good in pc....my old n73 is 3.2 mp camera but look far better in pc.....
the pictures are very shirp in wave but when i tramsfer those pic in pc they look ugly...why???my previous n73 camera pictures are looking far better in pc....
Proud to be a Wave owner,,,,
Check this out...
Have a nice time.. C U..
Radius, 30 Oct 2010Hallo everyone. Here goes a short manual how to use Service Mode for changing some volume conf... moreGreat post "Radius".
Thanks a lot on these step by step and useful information on volume adjustment.
I want to thank also to the original Mr Jatin for the ways how to increase wave's volume(if you want louder vol).
Wave's volume reseliency helps make the phone more popular (finalist or #5 on Magazine Ranking), one of the most wanted phone in the market and topping easily as current #1 phone in GSMArena by rating for 5 months now.
Peace be with you.
i`ve problem with my wave when download application and its remain pause and wont continue.i try every application and its still same n i try factory reset and still wont work...can anybody help me...plllzzzz
Hallo everyone. Here goes a short manual how to use Service Mode for changing some volume configuration.
I have not found any risk in the procedure and it's completely reversible, though try it by your own responsibility. My advice is not to change anything if you are not shure what you are doing.
In phone dial pad enter *#197328640#
A list of options appears:
 Debug Screen
 Version Information
 RF Test
Below the list there is a number pad, click 5 in order to get in the Audio menu, for example.
New list of options appears:
 CP Config
 AP Volume Config
 AP Codec Gain.Config
 Add Configuration
 AP Solution Config
 CP Solution Config
 Add Configuration
In number pad below click 2 in order to get in AP Volume Config menu.
5.2. AP Volume Config
New list of options appears:
 RCV Config
 EAR Config
 SPK Config
 BTH Config
Again, you can use the number pad below to enter each of this submenu topics. Before proceeding onwards, let's discuss briefly what each of lines mean, because they determine the master volume of the four peripherial sound devices:
- RCV stands for Receiver (frontal Earpiece, you use it mainly for making phone conversations)
- EAR stands for Earphones (3.5 mm Headset, used mostly for listening music)
- SPK stands for Speakerphone (side Loudspeaker, used in playing audio/video files and conference calls)
- BTH stands for BlueTooth audio (devices such as BlueTooth Headsets etc.)
All of these 4 submenues have identical structure.
5.2.1. RCV / 5.2.2. EAR / 5.2.3. SPK / 5.2.4. BTH Config
List of options:
 MP volume
 Keytone volume
 Rintone volume
 REC volume
 FM Radio volume
 Camera volume
 Voice Call volume
 VT Call volume
 Voice Memo volume
You can use the number pad below to enter each of these final submenu options. Whichever you choose, you will see 7 lines (0...6) and corresponding volume gains in dB. At this point I can not tell what is the difference between those 7 lines, so when changing any of those submenu option I change all 7 lines identically.
For example, I was not satisfied by the Earpiece volume, coz sometimes I didn't hear people loud enough. So I've entered into 184.108.40.206. submenu. On the screen appeared 7 gain lines, and it was written that I am in READ status. To change line 0, I clicked "0" on the number pad below and status has changed to WRITE. Now it is supposed to enter the new dB gain in the bottom (white) text field, but don't use the number keypad. Instead, touch the upper border of the white text field and standard Wave keyboard will appear. Now you can easily enter the desired digits and confirm the change by pressing twice the OK button. You can enter whatever number you wish. It was said that maximum acceptable number is 100 dB, but it's not true. Anyway, I didn't risk with bigger (> 100) numbers to avoid damaging my hardware. In this manner I've changed all 7 lines to 100 dB.
Someone said that this procedure is tricky, but believe me, it's not. Just be patient, for sometimes it takes over a second for menu and gain changes to take place.
To exit Service Mode after finishing all of your changes you just have to press hardware "End Call" button.
Lastly, I'll provide you with all the default values in case something goes wrong:
220.127.116.11. RCV / Voice call volume
- all 7 lines: 60 dB (I've change all of them to 100)
18.104.22.168. EAR / Voice call volume
- all 7 lines: 46 dB (I've found this good enough)
22.214.171.124. SPK / Voice call volume
- all 7 lines: 57 dB (I've changed all of them to 87)
It is obvious that you can do a lot of changes. Many people find it useful to up the Earphones volume, REC volume and Voice Memo volume. The choice is yours.
Sorry for the long post and bad English.
rah, 30 Oct 2010plz... tell me can we operate menu options during call, n can we play songs during call.......... moreyes you can operatre menu during a call.you press the diamond shaped main menu button and you can access things like contacts and such without cancelling the call.as for playing music during a call i really dont know what you mean but when you are talking obviuosly the music player is paused untill you cancell the call and then it starts up again.if thats what you mean.if not let me know.
ravi_86, 27 Oct 2010have been using wave for almost 3 months now ..but recently m having a prob though its small b... morehi dont become worried on that. just try master reset or flashing.. its just like our pc'S getting hanged when playing GTA Vice city and other graphics games. try to avoid playing games in any mobiles...
plz... tell me can we operate menu options during call, n can we play songs during call.......plzzzzzzz plzzzzzzz tell me.... thnks