changing the modes AP UART and CP UART is stable????
user who already did this share your experience....
how long have you done it????
Wave noob, 10 Oct 2010Hey buddy I'm keen on purchasing class 6 32gb card.what's the brand of memory card you are usi... moreMy 32gb card is class 2 sandisk cannot find anything better than class2 @ 32gb..My 16gb card class 6 is kingston but i honestly cant see much speed difference..From now on i will stick with sandisk as ive done since 2002.I cant promise this but some testing has revealed class2 sandisk can reach write speed of 7Mb/s ..The class2 means that the card MUST write at minimum speed of 2Mb/s,,class 4 4Mb/s and son on but this is s aminmum standard..
To be honest again the kingston class 6 seems slower compared to class 2 sansdisk so now are we in a another mess were specs are specs and lies are being told..Like battery times,nobody has ever reached these stated battery times and cars doing 74 miles per gallon none of public or pros have achieved it..
I just bought wave a few days ago. Everything seems to be great except the ringtone. When there is an incoming call, the ringtone volume is very slow and only become loud after two seconds?Is it normal? I need feedback form wave users.
you can open all kind of documents, but if you want to edit them, you have to buy program.
Hey guys anyone really using this phone, can user tell me that is it possible to edit excel sheet n other documents? And does it comes preloaded with handset or user have to purchase the licensed copy? I Want to buy this phone plz reply. Thanks.
plz read all the instructions carefully before proceeding and do it on your own risk !!!!!
First of all you have download bada 1.2 with and multiloader from http://www.multiupload.com/8P155MOV1J
the battery life will take a small hit when upgraded to bada 1.2
plz backup all your contacts,messages,videos,photos by using kies and also make a note of the apps that u installed or else u will lose ur data.
also it is good if u make a note of the bluetooth and wifi mac id:- with the imei no.
1.Unzip the downloaded .rar file(password is:-samfirmware.com)
2.open extracted folder
3.open Multiloader (Run as administrator if you are using Vista or windows 7)
5.Check Full Download (Do not check Boot Change cause it may gives some serious problem if you didn't flash properly)
6.Click Amss button and select amss.bin file from extracted folder..
7.like this select all files
8.Apps - apps_compressed.bin
9.Rsrc1 - Rsrc_S8500_Open_Europe_Common.rc1
10.Rsrc2 - Rsrc2_S8500_Open_Euro_Common(Low).rc2
11.Factory FS - FactoryFs_S8500_Open_Europe_Common.ffs
12.CSC - CSC_S8500_Open_Europe_Common_OXA_XXJID.csc
13.SHP APP - ShpApp.app
14.Power off your phone(Wave)
15.connect your phone to pc using Usb cable provided with Wave..(Make sure that samsung kies installed on your pc).
16.Press and hold the following keys to enable Download mode
(Down Volume key, Lock button, End key(Power on or off button))
17.Now the phone will turned on with Download Enabled mode.
18.On the pc the driver will installed if it is not already installed.Wait until it finishes the installation process of Driver
19.Now press "Port Search" button on the Multiloader window
20.then it will show the Ready status if the driver installed properly(means the phone is connected properly)
21.Now press Download Button. It will start the flashing procedure. wait for 5 to 20 minutes( Approx)
After completing the flashing process the phone will restarts automatically.and then u will get a blue screen with some codes and again the phone will restart automatically.
22.Disconnect the Usb cable.
23.after u successfully install the new firmware hard reset by using *2767*3855# and then the phone will boot.
24.use this tutorial to update the camera firmware-
25.then change to cp UART (full power) or ap uart (powersaver) modes via *#8740# as u like
26.lastly check if bluetooth,wifi or imei id's are changed or not.
27.download the latest route 66 maps.
note- If it gets stuck on the bada screen when it restarts take out battery and then it will restart and work properly.
then if u like to increase the volume of wave then go to-
AP Volume Config by *#197328640# - Internal Settings
- SPK Config / Voice Call Volume
4: 57 -> 77 et 5: 57 -> 87 et 6: 57 -> 97
- SPK Config / MP Volume
5: 61-> 67 et 6: 61 -> 77
- SPK Config / Voice Memo Volume
0/1/2/3/4/5/6: 58 -> 100
- SPK Config / REC Volume
0/1/2/3/4/5/6: 63 -> 100
- SPK Config / Ringtone Volume
5: 61 -> 77 et 6: 61 -> 87
Steps to install Product Code of ur choice-
My original product code was Product Code: GT-S8500BAAFOP.
When I installed the S8500XXJID_Flash Full, and choose XEU in preconfiguration setting,
my product code was changed to GT-S8500BAAXEU in registry.
I tried to revert back to my original GT-S8500BAAFOP by installing all available
full firmwares, starting with S8500XXJF1 to S8500XXJH3 (using OXC CSC) but the registry
still showed my product code as GT-S8500BAAXEU.
At last I found the solution. And with this method, you can freely now choose the product code you
want for your phone. Just follow the steps below:
1. Install S8500XXJID_Full with the CSC file that contains the product code of your choice
(Example 1: OXA for SKT, XEO, XEF. XEU, ITV, DBT (Germany, France,UK, Italy, etc
2: OXC for FOP, THP, EUR (Spain, Portugal, Greece, etc)
3. etc, etc.
2. After installation, hard reset phone. Then go to admin mode => preconfiguration => and
install the CSC of your choice. Whichever you install will now be your product code.
Connect phone to KIES and check your windows registry.
NOTE: If you install S8500XXJID_Full with the default CSC file (in example 1 above) it's all easy.
But if you install with any other CSC file, phone will normally reboot constantly if you try to go
into MENU and setting. Don't worry, just install, hard reset, then enter admin mode to install your preferred CSC.
Once done, your product code will now be that of the CSC you have installed.
You can now put off phone, and flash your phone with that country's firmware and update to latest firmware via KIES.
OBSERVATION: I have tried this experiment with 2 XX phones and it worked perfectly for me.
Others should try and give feedback.
ADVANTAGES: If you have, for example, product code GT-S8500BAAFOP (Spain) with latest firmware as JH1.
And in Germany, for example, KIES has newer firmware, say JH7.
You can easily change your product code to GT-S8500BAADBT and upgrade via KIES.
Here are Some of the Codes which u can use to check ur phone info..
*#1234# - Shows Firmware version.
*#197328640# - Internal Settings
*2767*3855# - Hard Reset
*#0228# - Battery Info
*#0*# - LCD test
cp UART (full power) or ap uart (powersaver) modes via *#8740#
Administration mode: *#5239870*#
ats, 10 Oct 2010plz read all the instructions carefully before proceeding and do it on your own risk !!!!!
... moreis it possible with asia's wave model?
my SW version is -S8500DXJF2 and my
CSC Ver - S8500OLBJF1
pls. guide me the whole process, i'm willing to upgrade my firmware.. thanks
narcolepsy, 10 Oct 2010i haven't noticed any slow down with having both apps running at the same time. there is also ... more@ narcolepsy
Hi mate, just want to check with you did you run any external widget within you WAVE (e.g. EvMemo) ??
I was wondering whether Samsung can integrate that such widget into it Bada OS. It's so useful to me, but that "EvMemo" seems to have bug where it can slow down the phone, date numbering not display on 30th every month, phone hang after long run of this widget.....etc.
How about the file manager on Bada 1.2 ?? Can we now view the detail of the file like the file size, file type, folder size.....etc ??
Sudheer, 11 Oct 2010Hy Ramakrishna,
I too am from HYD. Could u pls let me know where (which store) u found Wave... moreHi,
You can buy wave at jagadish market in Hyderabad for 17,500. You dont have them available at other stores.
ac.phil, 11 Oct 2010hi,
i'm not very much sure with this but.. samsung wave differ depending on the region.? ex. ... moreim from philippines.. i think its not true.. mine only has the original 2g internal memory.. and the camera??? you can choose from 2 mp up to 5.. it depends on you if you want to save more memory then go to the lower mp.. but if you want to capture high quality pictures then use the 5 mp..
wave is the best.. proportion of proce over its quality
Bada OS is so smooth compares to everything else. Now make more phones with Bada OS.
Extremely good phone, even for me who is always unsatisfied. Cannot think of a single bad thing in the phone.
Gps works great, even if i don't have usage, only for fun.
For more free maps, go to Route66 web site, download Route66 Sync. This way you can have maps of any country for free on you memory card (but navigation is not free).
there is no need to say you that there are so many jealous people out there, especially when something is the best.
bada is young operating system, but so powerful and fast.Bada has potential to be the best operating system.When samsung wave was tested on gsm arena, there was about 100 application, but every day number of applications are increasing.Now you can find over thousand free and over thousand which you have do paid.You can install java application as well.For about year, number of application will be over 10000.
sorry guys these are right liks....
hi guys i've a question that i've visited samsungapps.com and it shows 1296 applications for wavw s8500..
but i've read some comments saying that there are a few applications available for this phone even if you read wave review there is written under MAIN DISADVANTAGES that "Limited number of available applications"
i want to buy this mobile, i'm a little confused PLEASE HELP!
Super amoled is the best screen for mobile phones ever made.s lcd look like piece of garbage compare to samoled.it is todays most advanced screen.people throwing their phones when they see samoled
adeel, 11 Oct 2010can any one tell me that difference between super amoled and super clear lcd reply me hurrythe super amoled is the best in the market,it has the best contrast ratio giving the deepest black color and vivid colors.
Help!!!, 11 Oct 2010Im going to buy this phone tomorrow ... any final advice ? (this phone or w8 for wave II s8530... moreIf your budget is high then you should wait for upcoming Android devices to come. Wave is okay too, but to wait for Wave 2 is meaningless. Here you go,
1- You should charge your phone for 6-8 hours at first charge.
2 - NO.
3- 'bada' 1.2 is not officially out yet, I'd suggest you to wait till it get released and available via Kies, till then you should wait.
4- Make sure after getting the phone that 'AP UART' mode is enabled. otherwise you will get that rubbish 1 day battery back up.
Best of luck.