gagan.goldy, 14 Feb 2012doing master reset after modding, a problem occurs and ur cedar needs to replace its motherboa... moreok gagan, if we modd the phone, we can't do master reset because, the phone will not start after master reset.but i wants to know that, if we do update using se update service what will happened? the same or not?
we can Flash it with wotanserver for its firmwires back and if we do master reset after flashing what will happen? the same thing?
Mjdsouza, 14 Feb 2012Why? What will happen if we master reset, if anything does happen we can refurbish the firmwar... moredoing master reset after modding, a problem occurs and ur cedar needs to replace its motherboard which is very costly.
This is a common problem in cedar.
gagan.goldy, 13 Feb 2012special advise for those whose cedar is out of warranty, do not master reset ur cedar after m... moreWhy? What will happen if we master reset, if anything does happen we can refurbish the firmware using update service.
Chuck, 13 Feb 2012I bought a SE Cedar Black Red some weeks back and have using it for the last 3 weeks. Solid ph... moreMy cedar's battery lasts up to 17-24hrs of moderate to heavy usage. If you don't use your cedar in maximum then better sell it. Cedar is made for heavy usage,not being just a standby phone. And about the camera: when you're in a place with weak light then the video recording will be somewhat lag and shaky. Cedar's camera is best in daytime. Try modding. We have what we call "camera driver". And about the loudspeaker, personally I don't listen to music using just the loudspeaker, I prefer using headsets. All I can advice is to modify your cedar. Go here: www.cedargreenheart.blogspot.com
special advise for those whose cedar is out of warranty,
do not master reset ur cedar after modding.
any body else can give me link for opera mini handler 6.5 ? Plz help me dudes
Arshad, 13 Feb 2012Plz tell about increase volumeDude change the acoustic, using far manager... read opinions that r given below...u will get ur answer. thank u.
Hi Chuck. You can increase the volume in two ways.
1. Remove the black tape at the back of the phone under the battery, its rectangular in shape and is right under the MicroSD Slot before the screw.
2. You can try Modding. You can search a lot of useful post here to help you mod your phone.
I hope this Helped.
Hello Everybody! i have a Cedar and how do you increase the speakerphone volume. i know its the volume control is on the side, but even at max the volume is feeble. Any other way. SE says its loud enough and i am not hard of hearing. Plz help asap.
I bought a SE Cedar Black Red some weeks back and have using it for the last 3 weeks. Solid phone and good feel, although being a Moto and Nokia fan found the cedars controls somewhat ackward and complicated. This is my daily use phone it is solid and i quite like it. can anyone pls enlighten me on (a ) The battery is fresh in this new phone, but drains out on standby in just aday. I seldom use the phone and its mostly on standby, and I dont use 3G or other resource draining features.(B) The camers is good but on video mode there is excessive flaring/shake which means one can only pan the camera very slowly. takes away from crisp videos. Gents pls help. Can the battery last longer and how to eliminate shake/ flaring in video mode.
hahahahahaha!...you don't have to remove the sticker that covers the speaker because it protects it from dusts and other particles that may enter...you can try using farmanager and downloading some accoustics and putting it to your phones software..=)
Naim, 11 Feb 2012Bad advise :-(why u say like that? actually what is the function of the sticker?
mosa, 11 Feb 2012there is sticker on the speaker remove it and u r problem would be finishedBad advise :-(
I got it.While you connect the phone via usb, you need to hold 'c' that is on the phone and not the 'c' on the keyboard.
Thanks for the answers YB.
But i m still not able to connect my phone after doing everything mentioned in cedargreenheart.blogspot.com