The Galaxy S II comes in the standard orange-colored AT&T box, which is quite compact. Inside, along with the phone, you will find a wall charger, a USB cable, and AT&T booklets. An MHL adapter is also to be found in the package. Oddly enough however, headphones and microSD card are notably missing.
While a lot of people these days are opting for aftermarket headphones to go with their smartphones, we believe that, for a premium smartphone and its retail package, they are a must have. Same goes for the microSD card.
In terms of measures, the Galaxy S II for AT&T mirrors the I9100 with 126 x 66 x 8.9mm. Compared to the I9100, the U.S version has put on 5 grams of weight. At 122 grams however, it would still qualify as light, given the set of features which it offers you.
Compared to its sibling for Sprint Wireless – the Epic 4G Touch, the Galaxy S II for AT&T is a lot more pocket friendly. You should keep in mind though, that the CDMA Galaxy S II has a bigger 4.5” screen, along with a battery, rocking the impressive 1800 mAh.
Plastic is the dominant material in the construction of the droid, but this is not a bad thing. Similarly sized, metal clad droids tend to be much heavier, so we are willing to compromise in this department. Besides, there is just enough metal in the device to give it a premium look along with its entire front being adorned by Corning Gorilla Glass.
The 4.3” Super AMOLED Plus of the smartphone is nothing short than a thing of beauty. Since its launch in the I9100, the unit has become the one to beat in the industry. Interestingly enough however, we are yet to see a better one on the market. You can find more about its performance here.
Below the screen, much like with all the U.S. bound Samsung droids, you will find four touch-sensitive buttons. Gone is the hardware button of the original Galaxy S II.
The earpiece, ambient light and proximity sensors, as well as the 2MP front-facing camera unit are located in the area above the screen.
The left side of the Samsung I9100 Galaxy S II features the volume rocker. The volume keys double as zoom lever in camera mode.
Unfortunately, all there is on the right is the power key. A dedicated camera key would have been a welcome addition. We find virtual shutter keys to be less than ideal.
The 3.5mm audio jack is located on the top of the smartphone.
The microUSB port at the bottom is used for both data connections and charging. Not only does it support USB host but it also comes with MHL enabling HDTV-out connectivity with the proper adapter.
MHL is a way of using both microUSB and HDMI through the same port. It makes sense, especially provided an HDMI port could’ve been near impossible to put in a phone this slim. The downside is you need an adapter to use a regular HDMI cable with this one.
The mouthpiece completes the bottom of the droid.
The back of the AT&T Galaxy S II is where the 8 megapixel Full HD-capable camera lens is located. Right next to it is the LED flash, which will probably see more use a flashlight and video-light than a still-camera assist.
The loudspeaker grille is also on the back of the device. It is located on the slightly elevated chin at the bottom.
Removing the paper thin battery cover reveals the SIM compartment, the 1650 mAh battery and the microSD card slot. The card slot can take microSD cards of up to 32GB, which can give you a maximum total storage of 48GB. The bad news is the memory card isn’t hot-swappable.
The 1650 mAh battery made it easily through a day of heavy usage. In case you are not a smartphone junkie, you might be able to squeeze out an extra day out of your Galaxy S II. Such performance is in line with the current offerings on the market.
Handling the Galaxy S II for AT&T is a pleasure. The textured plastic prevents accidental drops, while the slim body allows you single-handed use despite the relatively large size of the body.