Camon 30S Pro is the first phone with Helio G100, first Tecno with wireless charging

Tecno silently introduced the Camon 30S Pro. The latest addition to the Camon 30 family is the first Tecno smartphone with wireless charging.

Tecno equipped the Camon 30S Pro with a new Helio G100 chipset by Mediatek. There are still a lot of unknowns about the platform; we only know it is a 6nm platform with 7% better CPU performance.

The chip has CA 2.0 technology (Carrier-Aggregate) that allows downlink data to reach 300 Mbits, and Tecno calls it 4.5G, but the fact remains there's no 5G support on this one. Storage of the phone is 256 GB, while RAM is 8 GB but can be virtually extended to 16 GB.

Camon 30S Pro has a 6.78” AMOLED screen with Full HD+ resolution and up to 120 Hz refresh rate. There is a 50 MP selfie camera with eye-tracking AF inside a punch hole.

The main camera on the back has a 50 MP Sony IMX896 sensor that is 1/1.56” big with 1um pixel size and features OIS. Alongside it sits a 2 MP depth sensor.

Inside the phone is a 5,000 mAh battery that supports 45W wired charging. The wireless charging is rated at 20W, and the phone has a special magnetic case that allows the Tecno charging pad to snap right on the coil. The phone can also work on regular non-magnetic chargers from third-party OEMs.

Tecno provided three charging modes for three different scenarios, depending on user demand – Hyper Charge (the fastest), Smart Charge or Low Temp Charge. The Camon 30S Pro is also IP53 waterproof across the whole device.

Tecno Camon 30S Pro

Tecno Camon 30S Pro comes with NFC and FM radio and also has an IR blaster controlling legacy appliances; there is also a fingerprint scanner under the display. The OS is Android 14 with HIOS on top.

The device has a thin 7.75 mm body and is offered in three colors – Gray, Silver, and Gold. Tecno did not reveal any details about the Camon 30S Pro pricing and availability at this point.

Source